Anti-theft door exposure highlights the imperfections of China's door industry standards
2022-12-19 23:05:16
The day before yesterday, CCTV's “Weekly Quality Report†took the title of “Vulnerable Security Doorsâ€. After the unqualified security doors on the market were exposed, media around the country had to reproduce them. “The CCTV exposure highlights the lack of standards in the industry.†The relevant persons from Yongkang and Wuyi commented on this.
“The exposure of CCTV once again raised the issue of the door industry standards,†said the person in charge of the Wuyi County Bureau of Quality Supervision. “The rapid development of the door industry in the past few years has led to various types of doors, so it cannot be used as a security door standard. to measure."
At present, only national security standards for door security standards exist in domestic standards, and there is a large market demand for ordinary metal entry doors in the market. However, there are no national, local, or industry standards. It can only be set up by the company itself, and production can be organized according to filing standards. For a long time, the standard of security doors has been controversial. Anti-theft security door is implemented by the national mandatory standard (GB17565-1998), steel protection door is implemented by the Ministry of Light Industry standards (QB1136-1991), ordinary metal doors are based on the standards of the individual companies. This evaluation rule is only for anti-theft security doors, steel entrance door two, steel entrance door, although including ordinary metal doors, but the boundaries are unclear, is not conducive to product quality supervision and inspection and regulation. In addition, when some distributors and real estate developers advertised to consumers, they referred to steel entry doors and metal entry doors as anti-theft doors, which also led to the quality inspection of the anti-theft door of the Beijing Municipal Bureau of Industry and Commerce some time ago. Many companies in Yongkang and Wuyi have entered the “black listâ€.
"In 1998, the country formulated the "General Technical Conditions for Anti-theft Security Doors," and now this standard obviously cannot adapt to the increasingly refined market." In the first half of this year, deputy director of the Center for Security Technology and Defense Products Inspection Center of the Third Institute of Public Security, Ministry of Public Security, Xiao Xiaosheng After researching Yongkang, it also said that the state is currently pursuing revisions of industry standards in accordance with the requirements of categorized classifications, express consumers, and improved testing methods, so as to change the situation of "a standard management of the world".
On the same day when CCTV's report was aired, the reporter contacted Yongkang’s several door industry leaders, but they were all told that they were meeting in Chongqing. The content of the meeting was to determine the “General Technical Conditions for Safe Doors†draft for consultation as a “giant†in the industry. They were all invited to participate in the final review of the draft. It is understood that, according to the Exposure Draft, the quality assessment criteria for security doors will be divided into three levels. Each level will have specific technical parameters for evaluation to facilitate the supervision of the relevant departments. In addition, the reporter learned that as a major province of the door industry, on December 1 this year, our province will formally implement the “Regulations for the Evaluation and Evaluation of Product Quality Supervision and Inspection of Metal Entry Doors in Zhejiang Province†issued by the Provincial Bureau of Quality and Technical Supervision. There are three types of keeper on the market, namely anti-theft security doors, steel protection doors, and ordinary metal entry doors. The rules require that the three types of products must be marked on the door with "theft security doors" (codenamed FAM), " Steel protective doors (codenamed GHM) and permanent metal entry doors (codenamed PJM) are permanent features.
“The exposure of CCTV once again raised the issue of the door industry standards,†said the person in charge of the Wuyi County Bureau of Quality Supervision. “The rapid development of the door industry in the past few years has led to various types of doors, so it cannot be used as a security door standard. to measure."
At present, only national security standards for door security standards exist in domestic standards, and there is a large market demand for ordinary metal entry doors in the market. However, there are no national, local, or industry standards. It can only be set up by the company itself, and production can be organized according to filing standards. For a long time, the standard of security doors has been controversial. Anti-theft security door is implemented by the national mandatory standard (GB17565-1998), steel protection door is implemented by the Ministry of Light Industry standards (QB1136-1991), ordinary metal doors are based on the standards of the individual companies. This evaluation rule is only for anti-theft security doors, steel entrance door two, steel entrance door, although including ordinary metal doors, but the boundaries are unclear, is not conducive to product quality supervision and inspection and regulation. In addition, when some distributors and real estate developers advertised to consumers, they referred to steel entry doors and metal entry doors as anti-theft doors, which also led to the quality inspection of the anti-theft door of the Beijing Municipal Bureau of Industry and Commerce some time ago. Many companies in Yongkang and Wuyi have entered the “black listâ€.
"In 1998, the country formulated the "General Technical Conditions for Anti-theft Security Doors," and now this standard obviously cannot adapt to the increasingly refined market." In the first half of this year, deputy director of the Center for Security Technology and Defense Products Inspection Center of the Third Institute of Public Security, Ministry of Public Security, Xiao Xiaosheng After researching Yongkang, it also said that the state is currently pursuing revisions of industry standards in accordance with the requirements of categorized classifications, express consumers, and improved testing methods, so as to change the situation of "a standard management of the world".
On the same day when CCTV's report was aired, the reporter contacted Yongkang’s several door industry leaders, but they were all told that they were meeting in Chongqing. The content of the meeting was to determine the “General Technical Conditions for Safe Doors†draft for consultation as a “giant†in the industry. They were all invited to participate in the final review of the draft. It is understood that, according to the Exposure Draft, the quality assessment criteria for security doors will be divided into three levels. Each level will have specific technical parameters for evaluation to facilitate the supervision of the relevant departments. In addition, the reporter learned that as a major province of the door industry, on December 1 this year, our province will formally implement the “Regulations for the Evaluation and Evaluation of Product Quality Supervision and Inspection of Metal Entry Doors in Zhejiang Province†issued by the Provincial Bureau of Quality and Technical Supervision. There are three types of keeper on the market, namely anti-theft security doors, steel protection doors, and ordinary metal entry doors. The rules require that the three types of products must be marked on the door with "theft security doors" (codenamed FAM), " Steel protective doors (codenamed GHM) and permanent metal entry doors (codenamed PJM) are permanent features.
Release date:2006/11/30 9:17:09
Racking system are used in warehouse, supermarket, logistics, etc industries, including profiles like omega upright, C beam, shelf panel, C bracing...,We design and make all racking profile machines with client racking system drawings.
Racking upright Roll Forming Machine can be adjustable to make a series of racking columns of different sizes, or only make one size racking upright.
Shelf panel roll forming machine is adjustable to produce different sizes of shelf sheets.
Just provide your racking system profile drawings, then you will get the racking profiles machines you wish!
Racking Profile Machine,Racking Upright Rolling Machine,Racking Roll Forming Machine,Racking Upright Machine
Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.machinejinye.com