EPS Cement Sandwich Wall Panel Production Line
Our Advantages
Our rockwool (mineral wool) and EPS sandwich panel production line had been successfully exported to international markets, covering East Europe, Middle East, South and West Asia, Africa.
 Moreover, our mineral wool sandwich panel line comes with long service life of more than 5 years as well as high and reliable production efficiency.
Â
Features
Based on construction demand, this rockwool and EPS sandwich panel production line can cut panels of different lengths, and make rock wool, glass wool roof panel, jack panel and various kinds of sandwich panels.
Â
Parameters
1. The roll forming machine for corrugated roof panel, used by our mineral wool and EPS sandwich panel production line, employs gear reducer working under 5.5KW power. Consequently, direct production speed of this roll forming machine is 5.5m/min. After adopting stepless frequency conversion technology, production speed is optionally adjustable.
Â
2. Laminating machine also adopts gear reducer working under 2.2KW power. The direct production speed of this machine is 6m/min., and adjustable due to stepless frequency converter.
Â
3. Usually, speed for producing EPS sandwich panel ranges from 2.5m to 6m per minute, which is relatively lower for producing rock wool and glass wool panel (1.5m to 3m per minute).
Â
4. The entire mineral wool and EPS sandwich panel production line is controlled by synchronous motor controller, and available with stepless speed regulation and digital display.
Â
Sandwich Panel Introduction
Sandwich panel is new-type multi-purpose building material, ideal for construction and decoration. Our rockwool and EPS sandwich panel production line mainly produces two types of sandwich panel. One type is applied to roof, and the other is applied to wall. These materials possess multiple superiorities, such as heat preservation, fire prevention and decorative beauty.
Â
As a result of high strength, strong sense of beauty, simple construction and short construction time, the sandwich panel enjoys much wider application scope. It is applicable for plants, supermarkets, large-scale warehouses, long-span roofs, makeshift houses, and also well suited for refrigeration houses, clean rooms, air conditioning rooms, communication base stations, and many other places.
Â
Specification
Machine Components
| 1 | Decoiling system | 1 set |
| 2 | Roof panel roll forming machine | 1 set |
| 3 | EPS/Rook Wool board feeding system | 1 set |
| 4 | Adhesive(glue) system | 1 set |
| 5 | Laminating system | 1 set |
| 6 | Cutting system | 1 set |
| 7 | Output table | 1 set |
Technological process
Feeding material--put coiler--forming--press trough--drop glue--heating--roll rim--faucet--forming-- make trough--set length--cut the steel--output the production.
Â
Technical parameter
| Material Width | 1250mm |
| Thickness for EPS | 50mm, 75mm, 100mm(according to customer requirements,please provide profile drawing) |
| Thickness for steel sheet | 0.3-0.8mm |
| Length | Any length we can do according to your request |
| Main motor power | 40KW |
| Character | Light in weight, heat insulation, water resistant, cheap in price |
Machine pics
Â
Â
After-sales service
Technical Support
Fully providing technology supports both within and after the warranty period. Feed back to our customers at the first time.
Spare Parts
Promptly providing spare parts and wearing parts.
Upgrade
Improve technology and upgrade of equipments.
Other service
Raw Materials
Supply of raw materials made in China with good quality, quick delivery and reasonable price
Finished products purchase
FAQ
1)Q: What is the Warranty Machine ?
A: For our roll forming machine , we have 1 year warranty. If any quality problems in this period ,we will take on the shipping cost and replacement.
2)Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
3) Q: How do your machines compare with other big companies in this market?
A: We are up to date with the latest technology and improve our machines accordingly
4)Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very
beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
5) Q: Do you sell only standard machines?
A: No, most of our machines are built according to customers specifications, using top brand name components.
6) Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. The core of our company culture is honesty and credit. We are ALIBABA's gold
supplier with BV assessment. If you check with ALIBABA, you will see that we have never got any complaint from our customers.
Why say closed cooling tower is energy saving and environmental protection equipment, more and more users are using this kind of equipment to replace the original equipment (open tower), we can through data analysis and comparison, the two energy data accounting can be obvious. Energy consumption is basically two major aspects, one is water, the other is electricity. Both are energy costs that no cooling tower can escape, unless you leave the equipment on.
First of all, look at the consumption of water. Water is generally consumed in two aspects. One is the flying overflow after spraying, and the other is the evaporation consumption of water.
Let's look at the open cooling tower, the spray water of the tower is basically between two and three percent of the overflow rate, if we according to the daily operation of 10 hours, excluding holidays, 280 days of operation. According to the actual open cooling tower flow of 6000 cubic meters per hour to calculate. 6000*2%*10*280= 336,000 tons of water, and the same closed cooling tower, its spray flying overflow is very small, because after all, the spray work is carried out in the tower, almost can be controlled in a few thousandths, we calculate according to 5 thousandths, the same is 10 hours of work, 280 days a year operation, To achieve the same cooling amplitude is basically 4,500 tons per hour of closed cooling tower is enough, then the calculation results: 4,500 *0.5%*10*280= 63,000 tons, it is not difficult to see, because of the different design structure caused by the waste of spraying water resources, more than 200,000 tons of terror. The bigger the pool of the open tower, the more wasted water, because the evaporation area increases, and the closed cooling tower has no pool, so the consumption here is zero. Judging from the price of a ton of water, just such a equipment, a year to solve the capital of hundreds of thousands of enterprises.
Let's look at the comparison of electric energy, electric energy is not different, because they are all through the same power equipment to operate the equipment, the power of the two is similar, the running time is the same, basically the energy consumption is about the same.
To sum up, for the closed cooling tower energy saving accounting can be strong to open the tower out, and, today are advocating energy conservation and environmental protection, this is the general trend, so the closed cooling tower is more and more favored by the majority of users.
Closed Cooling Tower,Closed Circuit Cross Flow,Closed Loop Cooling Tower,Closed Circuit Cooler
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com