General Surface Support Buoy, Chain Through Buoy

Product Description
1. A Brief Introduction: 

Subsea eva foam buoyancy buoys are manufactured from a polyethylene thermo-laminated foam core encapsulated within self-colored polyurethane out skin. Used extensively in single point mooring (SPM) systems, the three main types of support buoy are: Cylindrical Buoy, Chain-Throught Buoy, Pick-Up Buoy(YT-PUB). 

Here below we will introduce the details of pick up buoy(YT-PUB)

2. Usage: 

General purpose pick-up buoy is sued for mooring, marker and pick-up duties. 

3. Constructions: 
 
3-1
Closed-Cell Foam Core
The core is manufactured by batching up the resilient closed cell polyethylene closed cell foam and uniformly and continuously thermolaminating each layer together. The method ensures a bond stronger than the foam itself and eliminates the use of adhesives which can break down under long use. Useing of a polyethylene foam core ensure the buoy will not absorb water even if the skin is punctured, increasing the lifespan of the product and reducing maintenance costs. The resilient material makes the buys self fendering with a high impact absorption capacity. 
3-2
PU-Skin
The core is encapsulated with a skin of high performance polyurethane elastomer, spray applied. Polyurethane elastomer is selected for the skin because of its high resistance to abrasion, fatigue and ultra violet degradation and is significantly more durable than polyethylene materials used in the construction of rotationally moulded buoy. 
3-3
Steelwok and end assembly
Comprising through central steel tube with longitudinal gussets and external load distribution flanges at each end. A swivel assembly, certified 10 tonnes SWL, with bows at each end passes through the central tube. 
All the material of swivel assembly are hot DIP galvanized. Steelwork to be coal tar epoxy painted. 

3-4
Material: Swivel assembly: Bows to BS970
Gusets, flanges carbon steel to BS EN10025 Fe 430 A or B
Central tube to BS 6323 PT 3 HFS 5
3-5
Finish: Swivel assembly hot DIP galvanized to BS 729 Zn2/Zn4 at 610 G/M2
Steelwok to be coal tar epoxy painted
3-6
Skin Colour: Orange, Yellow and others



 

Sizes and Technical Specifications:

Tower Crane

Hammerhead Tower Crane is widely used in ports, workshops, electric power, construction sites and other places of lifting machinery.

Luffing-jib Tower Crane is a boom amplitude, can swing up and down the crane, by adjusting the boom Angle to change the amplitude.
Flat-top Tower Crane features stable operation and reliable management due to the adoption of various advanced technologies.

Hammerhead Tower Crane,Flat-Top Tower Crane,Luffing-Jib Tower Crane,Direct Tower Crane

Jinan Shanghangda Machinery Co., Ltd. , https://www.shdmachines.com