Shandong steel market demand is considerable
2022-12-10 06:05:54
Zhang Shengsheng, general manager of Laiwu Steel Co., Ltd. recently analyzed the demand situation of Shandong steel market. He believes that the steel market in Shandong will have unlimited business opportunities in the next five years, but the self-produced steel is obviously insufficient, and the gap in the structure of steel products is more prominent.
He believes that according to the manufacturing development plan of Shandong Province, by 2010, the added value of the above-scale manufacturing industry in the province will exceed 1 trillion yuan, an average annual growth rate of 15%, accounting for more than 90% of the province's industrial output; high-tech industry output value The proportion of industries above designated size has increased to over 35%, and the proportion of equipment manufacturing industry in manufacturing has increased to over 45%.
According to Shandong Province, 65% of the major industries have reached the domestic advanced level, of which 30% have reached the international advanced level. To achieve this goal, it is necessary to support more than 38 million tons of steel; the steel varieties are mainly hot-rolled sheets and cold-rolled sheets, wide and thick plates, construction steel and high-quality bars.
Specific analysis: (1) hot rolled sheet and cold rolled sheet. According to the manufacturing development plan of Shandong Province, many industries, such as automobiles, machinery, home appliances, containers, and construction, which are developing rapidly in the future, involve hot-rolled sheets and cold-rolled sheets, especially high-quality heats for thicknesses of less than 3 mm for cold rolling. Cold rolled sheet extension products such as rolled sheet, cold rolled sheet and galvanized sheet, and various coated sheets. By 2005, the annual consumption of sheet metal in the three industries of Shandong automobile, home appliance and shipbuilding was between 6 million and 8 million tons.
Among them, the production of only 800,000 vehicles requires 2 million tons of sheet metal (1 million tons of thin-plate and medium-broad steel); in 2010, 1.7 million vehicles will be planned for production, and the demand for sheet metal will reach 6 million tons or more (thin sheet, Medium-width steel each 3 million tons).
(2) Wide and thick plates. The shipbuilding industry and the West-East Gas Pipeline Project mainly focus on wide and thick plates. According to the plan, the shipbuilding capacity of Shandong Province will reach 6 million DWT in 2010, and the annual demand for thick plate is about 1.5 million tons. The West-East Gas Pipeline will also pass through the territory of Shandong Province. In the future, a large number of wide and thick plate products will be needed in Shandong.
(3) Steel for construction. With the construction of the Shandong Peninsula urban agglomeration and manufacturing base, the amount of steel for construction will increase significantly, mainly with H-beams and ribbed steel bars of grade III or above. As the country is promoting green and energy-saving building systems, the steel for construction is mainly based on H-beam steel structural materials with large, medium and small specifications, and upgraded steel for construction with emphasis on ribbed steel bars of grade III or above.
(4) High quality bars. Body rods are mainly used in the automotive, agricultural vehicles, machinery manufacturing industries, etc., mainly including alloy structural steel, gear steel, spring steel, bearing steel, die steel, cold heading steel, stainless steel long products. By 2010, the annual demand is over 2.5 million tons.
(5) Stainless steel strip steel. Stainless steel strip is mainly used in home appliances, light industry and other industries. Shandong's home appliances and light industry are important in the country. Stainless steel strips are blank products in Shandong Province and are one of the products with development prospects. It is estimated that the demand for stainless steel strips will reach 600,000 tons by 2010.
In the face of considerable market demand, the self-produced steel in Shandong Province is obviously insufficient, and the gap in the structure of steel products is more prominent. In 2004, Shandong Province produced 201 million tons of steel, of which construction steel accounted for about 2/3, while the high-quality steel used in the manufacturing industry had a self-sufficiency rate of less than 17%. Hot-rolled sheets, cold-rolled sheets and stainless steel sheets were still blank products. .
Zhang Shengsheng believes that the development of Shandong manufacturing industry also brings opportunities for the development of metallurgical powders and products. According to the development plan of the automobile industry in Shandong Province, the production capacity of Shandong's complete vehicle reached 1.7 million vehicles per day in 2010, and the amount of metallurgical powder products for automobiles has become a symbol of the national automobile development level.
According to relevant information, the average metallurgical powder product usage of American family cars has reached 15KG/car, and some automobile industry developed countries have reached 18KG/car, while China is less than 4KG/car. In order to enhance the competitiveness of China's automobiles in the international market, the amount of automotive metallurgical powder materials in China will increase significantly in the future, especially for various high-performance steel powders. According to the average annual consumption of metallurgical powder materials of 15KG / vehicle, the demand for powder metallurgy will reach 80,000 tons.
At present, there is only one steel powder metallurgy production enterprise with a certain scale in Shandong Province. In 2004, it actually produced 30,209 tons of metallurgical powder. In the future, Shandong metallurgical powder market has huge space.
He believes that according to the manufacturing development plan of Shandong Province, by 2010, the added value of the above-scale manufacturing industry in the province will exceed 1 trillion yuan, an average annual growth rate of 15%, accounting for more than 90% of the province's industrial output; high-tech industry output value The proportion of industries above designated size has increased to over 35%, and the proportion of equipment manufacturing industry in manufacturing has increased to over 45%.
According to Shandong Province, 65% of the major industries have reached the domestic advanced level, of which 30% have reached the international advanced level. To achieve this goal, it is necessary to support more than 38 million tons of steel; the steel varieties are mainly hot-rolled sheets and cold-rolled sheets, wide and thick plates, construction steel and high-quality bars.
Specific analysis: (1) hot rolled sheet and cold rolled sheet. According to the manufacturing development plan of Shandong Province, many industries, such as automobiles, machinery, home appliances, containers, and construction, which are developing rapidly in the future, involve hot-rolled sheets and cold-rolled sheets, especially high-quality heats for thicknesses of less than 3 mm for cold rolling. Cold rolled sheet extension products such as rolled sheet, cold rolled sheet and galvanized sheet, and various coated sheets. By 2005, the annual consumption of sheet metal in the three industries of Shandong automobile, home appliance and shipbuilding was between 6 million and 8 million tons.
Among them, the production of only 800,000 vehicles requires 2 million tons of sheet metal (1 million tons of thin-plate and medium-broad steel); in 2010, 1.7 million vehicles will be planned for production, and the demand for sheet metal will reach 6 million tons or more (thin sheet, Medium-width steel each 3 million tons).
(2) Wide and thick plates. The shipbuilding industry and the West-East Gas Pipeline Project mainly focus on wide and thick plates. According to the plan, the shipbuilding capacity of Shandong Province will reach 6 million DWT in 2010, and the annual demand for thick plate is about 1.5 million tons. The West-East Gas Pipeline will also pass through the territory of Shandong Province. In the future, a large number of wide and thick plate products will be needed in Shandong.
(3) Steel for construction. With the construction of the Shandong Peninsula urban agglomeration and manufacturing base, the amount of steel for construction will increase significantly, mainly with H-beams and ribbed steel bars of grade III or above. As the country is promoting green and energy-saving building systems, the steel for construction is mainly based on H-beam steel structural materials with large, medium and small specifications, and upgraded steel for construction with emphasis on ribbed steel bars of grade III or above.
(4) High quality bars. Body rods are mainly used in the automotive, agricultural vehicles, machinery manufacturing industries, etc., mainly including alloy structural steel, gear steel, spring steel, bearing steel, die steel, cold heading steel, stainless steel long products. By 2010, the annual demand is over 2.5 million tons.
(5) Stainless steel strip steel. Stainless steel strip is mainly used in home appliances, light industry and other industries. Shandong's home appliances and light industry are important in the country. Stainless steel strips are blank products in Shandong Province and are one of the products with development prospects. It is estimated that the demand for stainless steel strips will reach 600,000 tons by 2010.
In the face of considerable market demand, the self-produced steel in Shandong Province is obviously insufficient, and the gap in the structure of steel products is more prominent. In 2004, Shandong Province produced 201 million tons of steel, of which construction steel accounted for about 2/3, while the high-quality steel used in the manufacturing industry had a self-sufficiency rate of less than 17%. Hot-rolled sheets, cold-rolled sheets and stainless steel sheets were still blank products. .
Zhang Shengsheng believes that the development of Shandong manufacturing industry also brings opportunities for the development of metallurgical powders and products. According to the development plan of the automobile industry in Shandong Province, the production capacity of Shandong's complete vehicle reached 1.7 million vehicles per day in 2010, and the amount of metallurgical powder products for automobiles has become a symbol of the national automobile development level.
According to relevant information, the average metallurgical powder product usage of American family cars has reached 15KG/car, and some automobile industry developed countries have reached 18KG/car, while China is less than 4KG/car. In order to enhance the competitiveness of China's automobiles in the international market, the amount of automotive metallurgical powder materials in China will increase significantly in the future, especially for various high-performance steel powders. According to the average annual consumption of metallurgical powder materials of 15KG / vehicle, the demand for powder metallurgy will reach 80,000 tons.
At present, there is only one steel powder metallurgy production enterprise with a certain scale in Shandong Province. In 2004, it actually produced 30,209 tons of metallurgical powder. In the future, Shandong metallurgical powder market has huge space.
Metal Bellows and Mechanical Seal
Metal Bellows,Vacuum Bellows,Double Mechanical Seal,Balanced Mechanical Seal
WUXI ZHANGHUA PHARMACEUTICAL EQUIPMENT CO., LTD. , https://www.filterdryer1976.com