How many tons of axles does it mean to determine the carrying capacity?
In general, the number of axles of a car is about how many tons, mainly refers to the rear axle bearing capacity is a few tons, the front axle is much smaller but the depot will match the front and rear axles according to the vehicle design, so generally do not have to ask how much the front axle .
The size of the rear axle directly determines the carrying capacity of the vehicle, so the size of the rear axle when selecting the vehicle is critical. The rear axle of a typical heavy-duty truck has 10 tons (also known as 153 bridges, 435 bridges , etc., with 10.00 tires), 11.5 tons (such as 457 bridges, with 11.00 tires), 13 tons ( 485 single-stage bridges, Terrell Double Bridge, Mercedes-Benz Double Bridge, Ankai Double Bridge, etc., with 12.00 tires).
In principle, there is no 16- ton bridge. The state stipulates that the largest axle can only carry 13 tons, but in fact each bridge factory has 13- ton reinforced bridge, which is the past 16- ton bridge. This is only used in construction vehicles and Seriously overloaded vehicles.
The total load of each axle should be greater than the maximum gross mass of the vehicle announcement, such as an 8*4 four-axle heavy-duty truck. The state stipulates that the gross weight of the cargo must not exceed 31 tons, which is much less than the sum of the weights of the bearings. However, in fact, all riders often exceed the vehicle's driving permit when loading, which is also true.
The total load of each axle should be greater than the maximum gross mass of the vehicle announcement, such as an 8*4 four-axle heavy-duty truck. The state stipulates that the gross weight of the cargo must not exceed 31 tons, which is much less than the sum of the weights of the bearings. However, in fact, all riders often exceed the vehicle's driving permit when loading, which is also true.
Hywell Machinery company proffesional to design and manufacture the Pulverizer Machine that include 30B Universal Pulverizer, CSJ Coarse Pulverizer, WF Superfine Pulverizer , welcome to contact us and we will offer competitive price !
Pulverizer Machine main have three kinds final size materials Pulverizer (10-30mesh, 20-150mesh, 120-500mesh ). when customer want to get different kinds final size materials and capacity, we will recommend the different Pulverizer to reach customer requirement, the Pulverizer machine be made all stainless steel and the machine constraction also meet the requirements of GMP.
Pulverizer Machine,Universial Pin Mill,Universal Pulverizer,Coarse Pulverizer,Superfine Pulverizer
Changzhou Hywell Machinery Co,.Ltd , https://www.hywell-dryers.com