Oxygen and Fuel Gas Distributor for CNC Cutting Machine

2024-04-18 05:07:37
Model NO.: LT-FPQ
HS Code: 84689000
Model NO.: LT-FPQ
HS Code: 84689000

Different Type Gas Distributer for CNC Cutting  Machine

Gas Distributor Specifications
 

Product Name Two In and Three Out Two In and Six Out Three In and Three Out Portable cnc Cutting Machine Distributor Type1 Portable CNC Cutting Machine Type 2
Gas Service Oxygen/Fuel Gas Oxygen /Fuel Gas Oxygen/Fuel Gas Oxygen/Fuel Gas Oxygen/Fuel Gas
Inlet Connection M16*1.5 M20*1.5 M12*1.25 M12*1.25 M12*1.25
Outlet Connection M16*1.5 M16*1.5 M12*1.25 M12*1.25 M12*1.25

1)Product Description:
1. This distribution could make these two inlets into three outlets, adding more outlets for gas use in the CNC cutting machine which is more convenience for gas supply. 
2. For two inlets, one for oxygen supply, the other one for fuel gas(acetylene and propane).

3. The spare parts and accessories for the gas supply in CNC flame cutting machine.

 

2)Quick Detail:

1. Cutting machine use gas distributors
2. Use for Cutting machine to distribute gas
3. Gas supply control

 

3)Description:
Gas Distributors II Type For Portable CNC Laser Cutting Machine
For two inlets, one for oxygen supply, the other one for fuel gas(acetylene and propane).
Inlet Connection: M12*1.25 or M16*1.5
utlet Connection: M12*1.25 or M16*1.5

 

4)Applications:
Accessories for connecting pipes in the gas piping system.

 

5)Maintenance Skills:
1. Install the connectors correctlly.
2. Replace the consumbles in time before completely damaged.
3. Keep the connection threads of the cutting clean.
4. Check if there are loose parts.

Oxygen and Fuel Gas Distributor for CNC Cutting Machine

Oxygen and Fuel Gas Distributor for CNC Cutting Machine
 

Different Type Gas Distributer for CNC Cutting  Machine

Gas Distributor Specifications
 

Product Name Two In and Three Out Two In and Six Out Three In and Three Out Portable cnc Cutting Machine Distributor Type1 Portable CNC Cutting Machine Type 2
Gas Service Oxygen/Fuel Gas Oxygen /Fuel Gas Oxygen/Fuel Gas Oxygen/Fuel Gas Oxygen/Fuel Gas
Inlet Connection M16*1.5 M20*1.5 M12*1.25 M12*1.25 M12*1.25
Outlet Connection M16*1.5 M16*1.5 M12*1.25 M12*1.25 M12*1.25

1)Product Description:
1. This distribution could make these two inlets into three outlets, adding more outlets for gas use in the CNC cutting machine which is more convenience for gas supply. 
2. For two inlets, one for oxygen supply, the other one for fuel gas(acetylene and propane).

3. The spare parts and accessories for the gas supply in CNC flame cutting machine.

 

2)Quick Detail:

1. Cutting machine use gas distributors
2. Use for Cutting machine to distribute gas
3. Gas supply control

 

3)Description:
Gas Distributors II Type For Portable CNC Laser Cutting Machine
For two inlets, one for oxygen supply, the other one for fuel gas(acetylene and propane).
Inlet Connection: M12*1.25 or M16*1.5
utlet Connection: M12*1.25 or M16*1.5

 

4)Applications:
Accessories for connecting pipes in the gas piping system.

 

5)Maintenance Skills:
1. Install the connectors correctlly.
2. Replace the consumbles in time before completely damaged.
3. Keep the connection threads of the cutting clean.
4. Check if there are loose parts.

Oxygen and Fuel Gas Distributor for CNC Cutting Machine

Oxygen and Fuel Gas Distributor for CNC Cutting Machine
 

Pretreatment Auxiliaries

Pretreatment Auxiliaries,Textile Degreaser Product,Alkali-Resistant Wetting Agent,Multifunctional Degreasing Agent

Dymatic Chemicals, Inc. , https://www.dymachem.com