The composition of the rubber cutting machine

1. The rubber cutting machine is defined as a machine that cuts rubber blocks (sheets) for plastication in the next process.

2. The classification of cutting machines The cutting machines can be divided into horizontal cutters and vertical cutters. According to the different cutters, they can be divided into hydraulic pressure, partial pressure, and electric power transmission. They are also divided into single-pole and double-pole according to the number of cutters. Horizontal hydraulic cutter, equipped with a star ten blade cutter, uses oil pressure to cut the unheated rubber block into ten wedge-shaped small pieces and send it through a knife gap to a continuous heating chamber for heating. The use of refining. Operational safety, large output, and create conditions for the automation and continuous production process. In addition, there are hydraulically-driven, motor-driven and compressed air-driven vertical cutters, as well as styrene-butadiene rubber cutters that are previously cut into thin strips for thermoplastics.

3. The structural composition of the rubber cutting machine The rubber cutting machine mainly consists of a plastic cutting knife, a frame, a working oil cylinder, a base, an auxiliary working table, a hydraulic system, an electric system, etc. The base of the cutting plastic knife is equipped with a nylon pad to protect it. Cut the blade of the plastic knife. When the raw rubber is cut, the rubber material is manually placed under the rubber cutting knife, and then the start button is pressed, and the rubber cutting knife is driven by the piston rod to drop along the chute on the rack to cut the rubber material. The rack is equipped with two upper and lower limit switches to control the direction change valve to change the direction of movement of the plastic knife, and at the same time, it can also protect the piston cylinder head.